How Maryland Businesses Lose Pepco LED Rebates by Missing Key Requirements
Maryland businesses lose Pepco EmPOWER commercial LED rebates primarily for one reason: they start the project before submitting a pre-approval application. Pepco’s program is explicit that each project requires pre-approval before any product purchase or installation. A business that orders fixtures, receives a delivery, or…
Why Business Alarm Systems Trigger False Alerts During Summer Heat Waves
Commercial alarm systems trigger false alerts in summer heat because the passive infrared (PIR) sensors used in most commercial motion detectors rely on detecting heat differentials, and those differentials narrow as ambient temperatures rise. When the gap between background air temperature and body temperature shrinks,…
Why Your Circuit Breaker Keeps Tripping Every Time the AC Turns On
When your circuit breaker trips the moment the air conditioner starts, six problems account for nearly every case: the AC’s compressor is drawing a startup current surge the breaker cannot absorb, the circuit was never sized correctly for the unit, the breaker has aged and…
Why Your Ceiling Fan Is Not Making the Room Feel Cooler This Summer
A ceiling fan does not lower the temperature of a room. What it does is create a wind chill effect by moving air across your skin, which makes you feel several degrees cooler than the thermometer actually reads. If your ceiling fan is running but…
How Occupancy Sensors and Lighting Controls Actually Cut Your Commercial Energy Bill
Occupancy sensors and lighting controls reduce commercial lighting energy use by 24 to 80% in the spaces where they are installed, according to U.S. Department of Energy research on building controls. The range is wide because the savings depend heavily on how often lights would…
Smart Light Fixtures That Won’t Connect or Stay Connected After Installation
If you have installed a smart light fixture or switch and it will not connect to your app, keeps dropping off your network, or turns on but refuses to respond to commands, you are not alone. This is one of the most common calls we…
Why LED Light Fixtures Flicker and Buzz on a Dimmer Switch
If your LED fixtures flicker every time you use the dimmer, or if your dimmer switch hums or buzzes after you switched to LED bulbs, the problem is almost certainly not the LED bulbs themselves. It is the dimmer switch. Millions of dimmer switches installed…
How Shared Electrical Systems Cause Lighting Failures in Multi-Tenant Buildings
If lights in your building dim when a tenant runs heavy equipment, if corridor lights go dark every time a specific breaker trips, or if multiple tenants report flickering without any obvious single cause, the problem is almost certainly in the building’s shared electrical infrastructure,…
Why Occupancy Sensor Lights Malfunction in Commercial Buildings
If your office lights turn off while people are still working, if lights in an empty conference room come on by themselves, or if half of the warehouse stays lit all night despite sensors installed throughout, the problem is almost never a defective sensor. In…
How Professional Wiring Upgrades Prepare Homes for Smart Devices and Future Expansion
Homes do a lot more today than they did even a few years ago. A house may now support smart thermostats, video doorbells, security cameras, voice assistants, connected lighting, EV chargers, work-from-home equipment, streaming devices, smart appliances, garage controls, and mobile charging in nearly every…